Use the Hawk Scraper to remove tile adhesives, carpet backing, industrial grease & soil, and coatings from hard surfaces. 13”,
17”, and 20” sizes. The Scraper drives six 1”x1” carbide steel blades, each on a dual-position rigid mount. Drive the Scraper with
a Hawk Severe Duty Floor Machine with a 1.5 HP motor.
Engineered Design
• Two sizes – 13″ and 20″. The 20″
Scraper fits 17″ and 20″
machines
• 3/8” thick steel plate construction. The plate is e-coated for
corrosion resistance.
• The plate is fit with six (6) tungsten steel cutter holders mounted
with easily removed, allen head screws
• Each cutter holder carries one (1) 1” x 1” carbide cutting blade.
Each blade has 8 cutting edges.
• Mount the blade for a wide cutting edge, or a sharp cutting point
• The Hawk Scraper
mounts on the floor machine with a custom
milled aluminum clutch plate on a riser (included).
The Hawk CLAW Diamond Pad Driver provides peak grinding and polishing results to the natural stone and concrete tradesman. The CLAW
is available in five sizes – 10”, 13”, 15”, 17”, and 20”, driving both 3” round, and trapezoidal tools.Tools are held in milled recesses
in the CLAW plate with the unique Mag-Lok industrial magnet system. Grinding and polishing tools mount securely on the plate, yet
are easy to change without shop tools.
Operating vibrations are reduced by Neoprene rubber vibration damping isolators built into
the mounting system with custom milled aluminum clutch plate. Power the CLAW with your severe-duty 1.5 HP rotary floor machines.
Engineered
Design:
• The weighted CLAW plate is built with 3/8” plate steel, e-coated
for corrosion resistance
and easier clean up
• The face of the CLAW plate is milled with round and trapezoidal
tool mounting recesses,
fit with a Mag-Lok industrial magnet
• The top of the plate is fit with a custom milled aluminum NP9200
clutch
plate, sitting on top of six 1” Neoprene rubber vibration
isolaters. These isolaters reduce vibration and flex
over high
points and lippage.
• Round 3” resin tools mount securely on a 3” metal adaptor plate
with hook and loop face. The adaptor and tool combination
mounts onto the CLAW plate with the Mag-Lok System.
•
The 17” and 20” CLAW plates add hand grab holes
• Includes round and trapezoidal hole blanks. Blanks prevent
debris buildup in recesses.
• Includes 3” steel mounting adapters with hook & loop mounting
• Order additional adapters(#KIT2018-1 – Set of 6), or the
replacement hook face sheet that mounts on the steel adapters
(#KIT2018 – Set of 6).
The Hawk HD provides maximum power with the twin capacitor AC motor and Hawk’s ruggedly reliable floor machine size. 100% motor construction for years of reliable service. The HD is powered by the 1.5 HP motor and offered with a wide range of tools, accessories and optional weights. The optional DX package adds the 4 gallon solution tank, custom fit splash guard and premium pad driver.
The only USA made dry vapor steam cleaners, the THERMA-KLEEN®, THERMA-STEEM® models are built to last. The THERMA-STEEM® #10 reaches pressures of 100 PSI/6.8 bar and maximum temperatures of 330°F/ 170°C. Operating this vapor steam cleaner is as easy as 1, 2, 3. Just pour the recommended water into the stainless steel boiler, plug into an electrical outlet and in minutes the machine is ready to start delivering serious cleaning power. The TS #10 portable, vapor steam cleaner is constructed and manufactured in our factory in Au Gres, Michigan with a commercial grade, all stainless steel body, boiler (lifetime warranty), and incoloy heating element. This unit includes heavy duty 10″ rubber wheels and a removable handle for better storage. It also includes all standard accessories, which easily store on the handle, making it an organized and professional work station. And as with all of our machines it includes a 1 year warranty on parts.
NOTE: Financing is Available for all Therma-Kleen Products. Click Here for more information.
The Hawk Orbitec Planetary Driver makes quick work of polishing large concrete and stone areas. Six independent sealed ball bearing pedestals spin 3” tools up to 400 RPM. Orbitec extends tool life through cool running. The Orbitec with counter-rotating heads work 60% faster than fixed tool drivers.
Engineered Design • The Orbitec Driver mounts under most conventional design 1.5 HP / 175 RPM floor machines • The aluminum clutch plate is custom milled to provide easy on and off mounting • Three sizes for use on 13”, 17” and 20” floor machines • The electroplated 1/2” thick steel drive plate is built with six tool-holding pedestal heads • These pedestals with are built with tool holding hook facing, securely mounting round diamond tools with hook-and-loop backing. Diamond tools are quickly changed without shop tools. • The floor machine drives the Orbitec plate at 175 RPM in a clockwise direction. The pedestals spin 3” diamond tools at 400 RPM in a counter clockwise direction. This counter- rotating operation drives diamond tools 60% faster than fixed mount drivers.
• Add the optional dust ring and vacuum hose mounting kits to your Hawk floor machine for dust containment • Add optional machine weights on your Hawk floor machine for greater down pressure and faster floor prep results • Order diamond tools separately
Square Scrub, the leader in orbital cleaning technology is proud to introduce the newly redesigned EBG-20/C and EBG-28. The new Square Scrub Pivot machines include a pivoting head for balanced contact & easier control. The new pivoting head releases the control handle from the bottom of the base, allowing the machine to pivot freely front to back. This pivoting motion follows uneven floors more efficiently. The new floating design allows the head to have near perfect front to back and side to side weight distribution. Near perfect weight distribution allows the entire pad to make equal contact with the floor, allowing equal distribution of the work across the entire pad. Other designs place more pressure on the front or rear of the machine causing uneven pad ware. Featuring a redesigned sleek 7-gauge stainless steel base, the New Square Scrub Pivot can handle the toughest of floor preparation jobs including: tile & grout, VCT wet or dry, wood floors, stone care, and more. Square Scrub Pivot, Innovation Evolved!
Pads for use with the EBG-28 PIVOT:
EBG-28 SQP Pad – for dry stripping acrylic finish without chemicals.
EBG-28 SHO Pad – used for chemical stripping VCT.
EBG-28 3D Scrub Pad (Blue Tile & Grout Pad) – clean tile & grout, LVT, concrete and more.
EBG-28 60 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-28 80 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-28 100 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-28 120 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-28 150 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-28 180 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-28 24 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-28 36 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-28 60 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-28 80 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-28 100 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-28 20 Grit Sandpaper – used for sanding wood floors or decks.
EBG-28 36 Grit Sandpaper – used for sanding wood floors or decks.
EBG-28 60 Grit Sandpaper – used for sanding wood floors or decks.
EBG-28 80 Grit Sandpaper – used for sanding wood floors or decks.
EBG-28 100 Grit Sandpaper – used for sanding wood floors or decks.
EBG-28 White Pad – used as a light duty polish pad.
EBG-28 Xtreme Sponge – great for cleaning resilient flooring, great for spreading chemicals while buffing.
EBG-28 SSE Pad – designed exclusively for Square Scrub as a restorative pad. Use wet on VCT and tile.
EBG-28 Blue Driver Pad – can be used for heavier cleaning and buffing situations, but primarily used as a spacer pad.
EBG-28 Red Driver Pad – light duty red pad produces best results in a light cleaning and buffing situation. Primarily used as a spacer pad. Use wet or dry on VCT and tile.
EBG-28 1/4″ White Driver Pad – used as a spacer pad.
28″ Microfiber Carpet Cleaning Pad – used to clean carpet while using encapsulation cleaner.
Square Scrub, the leader in orbital cleaning technology is proud to introduce the newly redesigned EBG-20/C and EBG-28. The new Square Scrub Pivot machines include a pivoting head for balanced contact & easier control. The new pivoting head releases the control handle from the bottom of the base, allowing the machine to pivot freely front to back. This pivoting motion follows uneven floors more efficiently. The new floating design allows the head to have near perfect front to back and side to side weight distribution. Near perfect weight distribution allows the entire pad to make equal contact with the floor, allowing equal distribution of the work across the entire pad. Other designs place more pressure on the front or rear of the machine causing uneven pad ware. Featuring a redesigned sleek 7-gauge stainless steel base, the New Square Scrub Pivot can handle the toughest of floor preparation jobs including: tile & grout, VCT wet or dry, wood floors, stone care, and more. Square Scrub Pivot, Innovation Evolved!
Pads for use with the EBG-20/C PIVOT:
EBG-20 SQP Pad – for dry stripping acrylic finish without chemicals.
EBG-20 SHO Pad – used for chemical stripping VCT.
EBG-20 3D Scrub Pad (Blue Tile & Grout Pad) – clean tile & grout, LVT, concrete and more.
EBG-20 Microfiber Carpet Pad – used to clean carpet while using encapsulation cleaner.
EBG-20 60 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-20 80 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-20 100 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-20 120 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-20 150 Grit Sandscreen – used to remove finish such as on gym floors.
EBG-20 White Pad – used as a light duty polish pad.
EBG-20 Xtreme Sponge – great for cleaning resilient flooring, great for spreading chemicals while buffing.
EBG-20 SSE Pad – designed exclusively for Square Scrub as a restorative pad. Use wet on VCT and tile.
EBG-20 Blue Driver Pad – can be used for heavier cleaning and buffing situations, but primarily used as a spacer pad.
EBG-20 Red Driver Pad – light duty red pad produces best results in a light cleaning and buffing situation. Primarily used as a spacer pad. Use wet or dry on VCT and tile.
EBG-20 1/4″ White Driver Pad- used as a spacer pad.
EBG-20 Abrader Plate – Carbide Tungsten steel abrader tool. Designed for heavy duty use, including removing linoleum, glue, or paint on concrete.
EBG-20 24 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-20 36 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-20 60 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-20 80 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-20 100 Grit Pro Sandpaper – used for sanding wood floors or decks.
EBG-20 20 Grit Sandpaper – used for sanding wood floors or decks.
EBG-20 36 Grit Sandpaper – used for sanding wood floors or decks.
EBG-20 60 Grit Sandpaper – used for sanding wood floors or decks.
EBG-20 80 Grit Sandpaper – used for sanding wood floors or decks.
EBG-20 100 Grit Sandpaper – used for sanding wood floors or decks.
From Square Scrub, the leader in orbital cleaning technology, comes the Doodle Scrub EBG-9. Weighing in at 23 lbs., the EBG-9 gets in those tight spaces the big machines can’t. Doodle Scrub deep cleans under urinals, behind toilets, and even works great on stairs. With a new patent pending handle/base design, the Doodle Scrub handle can be attached on either end or the middle of the base, allowing a more mop like motion for absolute versatility. Scrub pads are available in SQP dry prep, tile and grout, xtreme sponge, and more. The Doodle Scrub EBG-9 goes where you can’t.
Pads for use with the Doodle Scrub:
White Driver Pad – used as a spacer pad.
SHO Pad – used for chemical stripping VCT.
White Pad – used as a light duty polish pad.
Xtreme Sponge – great for cleaning resilient flooring, great for spreading chemicals while buffing.
Blue Driver Pad – can be used for heavier cleaning and buffing situations, but primarily used as a spacer pad.
3D Scrub Pad or Blue Tile & Grout Pad – clean tile & grout, LVT, concrete and more.
SQP Pad – for dry stripping acrylic finish without chemicals.
Swivels onto its side to clean baseboards, walls, around kitchen equipment, and hard-to-reach areas where floor machines can’t reach. Polyester bristles. Resists water, high temperatures, acids, alkalis. Plastic block. BPA free. Resists most cleaning solutions. Perfect for everyday use in hotels/motels, food preparation, food processing, schools and health care facilities. Handles sold separately.
Swivels onto its side to clean baseboards, walls, around kitchen equipment, and hard-to-reach areas where floor machines can’t reach. Polyester bristles. Resists water, high temperatures, acids, alkalis. Plastic block. BPA free. Resists most cleaning solutions. Perfect for everyday use in hotels/motels, food preparation, food processing, schools and health care facilities. Handles sold separately.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Compare
Volume Pricing
Why should you purchase your janitorial supplies from CILYMI? With so many websites offering cleaning products, here are the reasons why you should consider CILYMI for your bulk cleaning product purchases.
SAVINGS– Simply put, the more you buy, the more you save. Larger orders can contribute to substantial savings by limiting packaging and transportation costs.
RELATIONSHIP PRICING – clients who purchase equipment from CILYMI realize the greatest discounts on consumable items.
VARIETY – we can source thousands of top-quality products
CUSTOMER SERVICE – We partner with purchasing agents, school districts, governmental agencies and other large-scale buyers.
SOURCING – We will work hard to locate and supply a multitude of industry-best janitorial products at the most competitive prices possible.
KNOWLEDGE – We seek to learn about your specific product needs and, when requested, recommend a suitable alternative product when the primary product is unavailable and or not cost-effective